GE IC694TBB032 Box-style Terminal Blocks
General info
| Manufacture | GE |
| Item No | IC694TBB032 |
| Article number | IC694TBB032 |
| Series | GE FANUC |
| Origin | United States（US） |
| Dimension | 180*180*30(mm) |
| Weight | 0.9 kg |
| Customs Tariff Number | 85389091 |
| Type | Box-style Terminal Blocks |
Detailed data
GE IC694TBB032 Box-style Terminal Blocks
The extended high-density terminal blocks, IC694TBB132 and IC694TBS132, are functionally identical to the high-density terminal blocks, IC694TBB032 and IC694TBS032. The extended high-density terminal blocks have housings that are approximately ½ inch (13 mm) deeper to accommodate wires with thicker insulation, such as those typically used in AC I/O modules.
The IC694TBB032 and IC694TBB132 are used with high-density PACSystems RX3i modules and equivalent 90-30 Series PLC modules. These terminal blocks provide 36 screw terminals for field wiring to the module.
Terminal Blocks IC694TBB032 and TBB132 are functionally identical. Terminal Blocks IC694TBB032 have standard depth covers. Once installed, they are the same depth as most other PACSystems and Series 90-30 PLC modules.
Extension Terminal Blocks IC694TBB132 have covers that are approximately ½ inch (13mm) deeper than Terminal Blocks IC694TBB032 to accommodate wires with thicker insulation, such as those typically used in AC I/O modules.
Connecting Field Wiring to a Box-Style High-density Terminal Block：
The bottom of the terminal block can be used as a gauge for the length of wire stripping, as shown in the following figure. The terminal block must be fully inserted after stripping so that the insulation meets the stop inside the terminal and the end of the wire is bent. Tightening the terminal screw lifts the wire and clamps it in place.
