GE IC698CPE010 Central Processing Unit
General info
| Manufacture | GE |
| Item No | IC698CPE010 |
| Article number | IC698CPE010 |
| Series | GE FANUC |
| Origin | United States（US） |
| Dimension | 180*180*30(mm) |
| Weight | 0.9 kg |
| Customs Tariff Number | 85389091 |
| Type | Central Processing Unit |
Detailed data
GE IC698CPE010 Central Processing Unit
The RX7i CPU is programmed and configured via programming software for real-time control of machines, processes, and material handling systems. The CPU communicates with I/O and intelligent option modules using the VME64 standard format through the rack-mount backplane. It communicates with programmers and HMI devices through the embedded Ethernet port or the serial port using the SNP Slave protocol.
CPE010: 300MHz Celeron microprocessor
CPE020: 700MHz Pentium III microprocessor
Features
▪ Includes 10 MB of battery-backed user memory and 10 MB of nonvolatile flash user memory.
▪ Access to large memory through reference table %W.
▪ Configurable data and program memory.
▪ Supports ladder diagram, C language, structured text, and function block diagram programming.
▪ Supports automatic positioning of symbolic variables and can use any size of user memory.
▪ Reference table sizes include 32 KB (discrete %I and %Q) and up to 32 KB (analog %AI and %AQ).
▪ Supports 90-70 series discrete and analog I/O, communication, and other modules. For a list of supported modules, refer to the PACSystems RX7i Installation Manual GFK-2223.
▪ Supports all VME modules supported by the 90-70 series.
▪ Supports monitoring of RX7i data via the Web. Up to 16 web server and FTP connections.
▪ Supports up to 512 program blocks. Maximum size of each program block is 128KB.
▪ Test edit mode allows you to easily test modifications to a running program.
▪ Bit-word references.
▪ Battery-backed calendar clock.
▪ In-system firmware upgrades.
▪ Three independent serial ports: one RS-485 serial port, one RS-232 serial port, and one RS-232 Ethernet Station Manager serial port.
▪ Embedded Ethernet interface provides:
- Data exchange using Ethernet Global Data (EGD)
- TCP/IP communication services using SRTP
- Support for SRTP channels, Modbus/TCP server, and Modbus/TCP client
- Comprehensive programming and configuration services
- Comprehensive site management and diagnostic tools
- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 connector) ports with built-in network switch that automatically negotiates network speed, duplex mode, and crossover detection.
- User-configurable redundant IP addresses
- Time synchronization with an SNTP time server on Ethernet (when used with CPU modules with version 5.00 or later).
